Serpens South Trial DSL2 Flags

From CARMA
Revision as of 12:19, 10 October 2012 by Sstorm (Talk | contribs)

Jump to: navigation, search

Notes

obs

2012-10-07           c0924I.4D_88Serpen.SL.2   5.4  A-
                               Comments:
                                NODE_NOT_FOUND
                                [2012-10-07 09:41]CA & SS : Odd behavior in last hour of
                               track: during an on-source portion that should have lasted 2
                               minutes and covered a dozen or so mosaic pointings, the
                               system queued up over a hundred pointings and was not
                               visiting the OFF position or the calibrator. We canceled the
                               script and restarted it after it made it through ~50
                               pointings. Due to the restart, some pointings were repeated.
                               Phase cal < 30 degrees for last 40 minutes of track to fill
                               in gap before next track could start. -1 hr.
2012-10-07           c0924I.4D_88Serpen.WB.2   5.4  C+
                               Comments:
                                NODE_NOT_FOUND
                                [2012-10-07 09:42]CA & SS : WB. Odd behavior in last hour of
                               track: during an on-source portion that should have lasted 2
                               minutes and covered a dozen or so mosaic pointings, the
                               system queued up over a hundred pointings and was not
                               visiting the OFF position or the calibrator. We canceled the
                               script and restarted it after it made it through ~50
                               pointings. Due to the restart, some pointings were repeated.
                               Phase cal < 30 degrees for last 40 minutes of track to fill
                               in gap before next track could start. -1 hr.

shaye

-Script was canceled and restarted mid-way through box 2
-After a seemingly flawless restart, the script went into a mode where it was observing > 100 on-source pointings without visiting 
   and OFF or phasecal!
  -Canceled script again and restarted

manuel

- No problems at all.
* RMS cont, box1/2: 7/8  mJy/beam 
* RMS HCO+, box1/2:  0.56/0.70 Jy/beam
* SD: apparently no problems.
* WB box1/2: 5/4 mJy/beam 

Flags

shaye

none
Personal tools