Miriad binary releases

Revision as of 14:15, 3 July 2009 by Peterteuben (Talk | contribs)

Jump to: navigation, search

For a few popular architectures we make binary releases available. They sometimes don't quite work for you if your compiler is not exactly the same as the one Miriad was compiled with. If so, you probably need to look at an installation from source.


Binary releases

See [1]. Local disk versions can also be found at OVRO and UMD. Pick the correct one matching your OS and compiler. Although we only distribute gnu (g77, gfortran) based releases, the intel compiler can easily give you a significant performance boost (10-100% depending on the application).

  • miriad_linux_*: Linux: versions for some linux distros (Fedora, Ubuntu, Centos)
  • miriad_linux64_*: linux IA-64 (use the command uname -a to see if you have a 32bit or 64bit processor)
  • miriad_max10.4_*: MacOSX/10.4 (tiger) - there might be a version for g77 and/or gfortran
  • miriad_mac10.5_*: MacOSX/10.5 (leopard) - a version for g77 and gfortran is also available now)

Then untar the file and patch the miriad_start scripts to reflect the location on your system e.g.

 % wget ftp://ftp.astro.umd.edu/progs/carma/miriad_darwin_intel_g77.tar.gz
 % tar zxf miriad_darwin_intel_g77.tar.gz
 % cd miriad
 % install/make_miriad_starts                     <-- this patches the miriad_start scripts, you need csh

If you don't have wget (e.g. MacOSX), you might have curl, and the first two lines can be combined as follows:

 % curl ftp://ftp.astro.umd.edu/progs/carma/miriad_darwin_intel_g77.tar.gz | tar zxf - 

Now source the appropriate startup file, depending on your shell, and miriad should now be usable in your shell. You can also make this permanent by adding this to your ~/.cshrc or ~/.bashrc file, e.g. for csh

 % source miriad_start.csh

and for bash

 $ source miriad_start.sh

It is quite possible that shared libraries on your system are not compatible with the ones in our binary releases. If so, you should try an installation from source. Or be brave and re-install an existing Miriad version.

Activating the new Build System

If you see a directory build_new in the miriad root directory ($MIR), a new build system has probably been installed and if for some reason you would like to try and activate it, do the following:

 % cd $MIR
 % ln -s build_new build
 % source miriad_start.csh

the same miriad_start knows the difference between old and new script and will act accordingly.

Equally simple, just remove the symbolic link if you want to de-activate it:

 % rm build


The WIP package is normally distributed as part of Miriad. It is possible to install it seperately, but the procedure is currently not well maintained outside of Miriad. With a few commands a binary version of WIP can be extracted from a binary version of Miriad. First follow the steps to install a binary version of Miriad (see above), then issue the command:

 % cd $MIR/install
 % wip.export

After which the wip directory can be copied anywhere. Make sure the wiprc is edited for the final location.


Each binary release is CVS enabled, albeit via the CVS anonymous account. This means you can cvs update your source tree and obtain new code, but not randomly edit and expect the merge to be successfull. If this all means nothing to you, we will cover this at the Party. However, here are some examples of fairly common modifications:

0) Update your miriad source, first checking what is new on the server

 % cd $MIR
 % cvs -nq update                <-- check that only two maxdim header files are tagged 'M' as locally modified
                                     anything like U is good, anything else M or C is bad.
 % cvs update                        Update the code

1) modifying a subroutine

 % mirboss
 % edit $MIRSUBS/fitsio.for
 % mir.subs fitsio

Caveat: on linux shared libraries are used, on Mac not yet, so all binaries would need to be rebuilt on Mac:

 % mir.install prog

2) modify a program

 % mirboss
 % edit $MIRPROG/convert/fits.for
 % mir.prog fits
Personal tools