If you have installed from source and have seen a line such as
installed 304/344 programs
something really bad has happened. Most likely during building or linking a common error occured for each problem. You can look in the logfiles in $MIR/tmp or try and compile a program to see it directly on the screen:
mirboss mir.subs fitsio mir.prog itemize
and see if any of the common problems below fit the description:
If you get the not-too-uncommon error
g77: command not found
you obviously don't have the right fortran compiler. Check if your system came with gfortran instead of g77. If so, add the
command line argument to the install.miriad or test_a_new_miriad_cvs script. If not, did you really read the requirements page?
Missing header files problem
Many workstation installation of linux and mac will install runtime libraries, but skip over the development version of these packages. In order to compile them, you will need them.
xpanel.c:89:25: error: X11/Xaw/Box.h: No such file or directory
fedora 9: libXaw-devel ubuntu 8.10: libaw7-dev
Commands like rpm -qf `locate X11/Xaw/Box.h` on an RPM based system, and ... on a DEB based system will help you find out what package a particular file belongs to.
- A common problem is a missing driver. Here is a recipe to enable a driver that you know will work:
edit $MIRLIB/drivers.list <--- (un)comment the drivers you want to include/exclude mirboss mir.install pgplot
When shared libraries are used, this is usually enough, all programs that use PGPLOT should now know about the new driver set. Use device=\? to view the active list.
- another common problem is that the X development files (include files such as Xos.h etc.) were not installed on your system. This is covered elsewhere on this page. You will most likely see that MIRIAD programs do not compile and complain about a missing -lpgplot
- on 64bit machines some drivers (notably the GIF driver) do not work. If you installation produces a seg fault, do the following:
cd $MIR/borrow/pgplot/drivers ./fix64bit.csh mirboss mir.install pgplot
and your shared library is updated. If you don't use shared libraries, all programs would have to be relinked as well (normally not needed)
- on one particular Mac 10.5 machine strange linking problems went away when this user was using a FINK based version of pgplot in the following way:
rm $MIRLIB/libpgplot.* cd $MIR install/install.miriad pgplot=0
hkmiriad is a hacked mostly-C based set of miriad programs that you can find in $MIR/src/spec/hkmiriad. It has been written by Jin Koda (caltech).
The old style install essentially uses this:
cd $MIR/borrow/zeno make miriad_install cd $MIR/src/spec/hkmiriad cp Makefile.hk Makefile make miriad_install
A common problem is the linking of fortran and C. If you have used the old-style install, there will be a Makefile in $MIR/install that contains the FLIBS= macro. Edit the Makefile in $MIR/src/spec/hkmiriad and replace the simple value for FLIBS (-lg2c) to be the more complex one. An example could be something like
FLIBS = -L/usr/lib/gcc/x86_64-redhat-linux/3.4.6 -L/usr/lib/gcc/x86_64-redhat-linux/3.4.6/../../../../lib64 -L/usr/lib/gcc/x86_64-redhat-linux/3.4.6/../../.. -L/lib/../lib64 -L/usr/lib/../lib64 -lfrtbegin -lg2c -lm -lgcc_s
Currently there is no support to install this in the new build system.
If you install from source, two of the most common problems for failure are:
- a missing or wrong fortran compiler. As of this writing g77 is still the default, but newer versions of gfortran now know how to build pgplot and no patching is needed anymore (except the keyword gfortran=1 to the install.miriad script).
- missing (X11) development packages. On linux your package manager should be queried for these. Unfortunately not each linux distribution (or version) will use the exact same name for this. A common example is the X11 development package. For example pgplot will need a file /usr/include/X11/Xos.h (it could also live somewhere else).
- fedora 7: xorg-x11-proto-devel-7.2-9.fc7
- ubuntu 8.04: x11proto-core-dev, libx11-dev
- mandrive 2008: libxorg-x11-devel
- mandrake 10.1: libxorg-x11-devel-6.8.2-0.5mdk
- on 64bit ubuntu8.04 here's a report on how to fix the system, where the libXaw library was 'missing', and also includes an example of installing some missing system tools.
cd /usr/lib ; ln -s libXaw7.so.7 libXaw.so apt-get install gfortran apt-get install g++ cd /usr/local/miriad_cvs ./autogen.sh ./configure --prefix=`pwd`/build F77=gfortran make make install
- the new build system has not been thoroughly tested. A common problem is with autogen.sh that results in a make that ends disappointingly as follows:
make: *** No rule to make target `install'. Stop. make: Leaving directory `/algol1/teuben/miriad/auto/miriad/borrow/pgplot' make: *** [install-recursive] Error 1
- the new build system may fail on latex building the manuals. If so, use 'make -i' instead.
- if you try to compile a program and you see some error message like this:
/usr/bin/ld: cannot find -lpgplot
most likely you have missing components on your system. Missing header file you might see. It means you did not install the development software for X11 on your system. It's one of the requirements. If this happens on a mac, go install Xcode. On linux you'll need to install the X develpment packages, as describe earlier on this page.
Mac OS X
Although the modern Mac is running a "unix" variant, there are some issues you should be aware of. Certainly make sure your requirements are met (i.e. you have compilers installed, some developer tools are present, etc.etc.). Here are some helpful notes if you get stuck building from source:
- Peter Williams' installation notes (2007, for 10.4)
- Ramprasad Rao's notes (2003/2004 for 10.2 and 10.3)
- Peter Teuben's notes (has other links)
- some linker issue on Ubuntu 7? The same error also occurs on Ubuntu 8.04
% mir.prog itemize ... /usr/bin/ld: /home/ijlee/miriad/bin/linux/itemize: hidden symbol `__stack_chk_fail_local' in /usr/lib/libc_nonshared.a(stack_chk_fail_local.oS) is referenced by DSO /usr/bin/ld: final link failed: Nonrepresentable section on output collect2: ld returned 1 exit status
- the new build cannot be easily relocated using the install/make_miriad_starts script
If you are activating the new build, i.e.
ln -s build_new build install/make_miriad_starts source miriad_start.csh
there are variables in automiriad.csh that have an absolute path and are not derived from $MIR. You will have to fix these manually. That includes a reference to PGPLOT variables in the pgplot-config.csh file.