Basic Observing/Data Reduction Commands

From CARMA
(Difference between revisions)
Jump to: navigation, search
Line 28: Line 28:
 
# Gain calibration.
 
# Gain calibration.
 
# Inverse Fourier Transform.
 
# Inverse Fourier Transform.
# Deconvolve
+
# Deconvolution.
 +
# Restore the clean map.
 +
# Display maps; analysis.
 +
 
 +
==== Getting information about a dataset ====
 +
 
 +
<tt>
 +
listobs vis=test_data.m82.mir
 +
 
 +
uvlist vis=test_data.m82.mir options=spec
 +
 
 +
uvindex vis=test_data.m82.mir
 +
</tt>
 +
 
 +
==== Displaying the u,v data ====
 +
 
 +
<tt>
 +
smauvplt vis=test_data.m82.2.mir axis=time,amp nxy=3,3 line=wide,1,1 device=1/xs options=2pass,source select="source(0841+708),-auto"
 +
 
 +
smauvplt vis=test_data.m82.2.mir axis=time,phase yrange=-180,180 nxy=3,3 line=wide,1,1 device=1/xs options=2pass,source select="source(0841+708),-auto"
 +
 
 +
smauvspec vis=test_data.m82.mir axis=chan,both nxy=2,2 interval=999 device=1/xs select="source(0854+201),-auto"
 +
</tt>

Revision as of 13:31, 8 August 2014

Contents

Basic Observing Commands

High-level commands to the antennas, receivers, and correlators are written in python. To execute these commands, you must open a python environment, called a subarray controller (or SAC). The "science1" SAC typically controls the 10-meter and 6-meter antennas and the Spectral Line (SL) correlator. To open the "science1" SAC, type:

sci1

The prompt will change to Sci#1[1]:

To get information about a source

To track a source

To tune the receivers

To configure the correlator

To integrate on a source

Basic Data Reduction Commands

  1. Gathering information about your data set.
  2. Baseline calibration.
  3. Linelength calibration.
  4. Displaying your data.
  5. Flagging bad data.
  6. Passband calibration.
  7. Flux calibration.
  8. Gain calibration.
  9. Inverse Fourier Transform.
  10. Deconvolution.
  11. Restore the clean map.
  12. Display maps; analysis.

Getting information about a dataset

listobs vis=test_data.m82.mir

uvlist vis=test_data.m82.mir options=spec

uvindex vis=test_data.m82.mir

Displaying the u,v data

smauvplt vis=test_data.m82.2.mir axis=time,amp nxy=3,3 line=wide,1,1 device=1/xs options=2pass,source select="source(0841+708),-auto"

smauvplt vis=test_data.m82.2.mir axis=time,phase yrange=-180,180 nxy=3,3 line=wide,1,1 device=1/xs options=2pass,source select="source(0841+708),-auto"

smauvspec vis=test_data.m82.mir axis=chan,both nxy=2,2 interval=999 device=1/xs select="source(0854+201),-auto"

Personal tools