B1s Trial 1D Flags

From CARMA
Jump to: navigation, search

Notes

obs

c0924I.1D_88B1S.1   6.6   B
                               Comments:
                                NODE_NOT_FOUND
                                [2012-04-21 09:37]Crystal A. & Rodrigo : Antenna 10 missing
                               but otherwise looks good

Flags

Shaye

what about that noise source problem? note to probably flag that too.

 csflag
 
 #FROM WIDE BAND INSPECTION
 select="source(NOISE),ant(11,12),win(1)"
 tsys=1500. # standard 
 qvack select="ant(8)" mode=source interval=0.25 # cal wheel problem
 select="ant(10)" # out of array for most of obs 
 select="ant(1),time(00:20:00,00:35:00)"
 select="ant(1)(2),time(00:07:28,00:22:00)"
 select="ant(8),time(22:10:00,22:26:31.5)" # low amp
 select="ant(8),time(00:27:27,00:29:44)" # high gain
 select="ant(8),time(01:36:59,01:40:17)" # low amp
 select="ant(11),time(00:41:00,00:43:55)" #low amp/high gain
 select="ant(2)(3),time(00:05:00,00:35:00)" #low amp
 select="ant(3)(11),time(22:17:30,22:26:32)" #low amp
 select="ant(4)(11),time(00:20:00,00:35:00)" #low amp
 select="ant(4)(14),time(00:20:00,01:30:00)" #low amp
 select="time(20:53:30,20:57:00)" #noisy phase at end of first 3c111
 
 #FROM NARROW BAND INSPECTION
 select="ant(18,22),win(1)" # noisy window 
 select="ant(22),win(4)" # noisy window 
 select="ant(11)(16,17,18,19,20,21,22,23),win(1)" # noisy window 


Woojin

Flags determined by win2 (continuum):
 *csflag
 *qvack select=ant(8) interval=0.25 mode=source
 *select=ant(8),time(22:17,22:19) # Additional amp drop points of c8, which are not excluded by qvack 
 high gain (> 20%) points below
 *select=ant(1),time(20:51:34,20:54:38)
 *select=ant(1),time(00:23:38,00:24:42)
 *select=ant(2),time(00:07:21,00:10:25)
 *select=ant(2),time(22:17:23,22:18:28)
 *select=ant(8),time(00:27:17,00:28:21)
 *select=ant(11),time(00:41:10,00:42:14)
Additional quick comments for the other windows (need more flags):
win1 (HCN)
 *C11 amp drops from 00:30
 *C12 amp drops from 00:40
 *C18 low amp, sparse data, no cal data from 01:30
 *C22 low amp
win3 (N2H+)
 *C18 low amp, sparse data, no cal data from 01:30
win4 (HCO+)
 *C18 low amp, sparse data, no cal data from 01:30
 *C22 low amp

Katherine

qvack select=ant(8) interval=0.25 mode=source
select=ant(1),time(00:09:49,00:27:27)
select=ant(8),time(22:10:00,22:26:00)
select=ant(8),time(00:27:30,00:28:10)
select=ant(10)
select=ant(11),time(00:40:14.5,00:55:15.5)
Personal tools