Manpage of callist
Section: User Commands (1)
Return to Main Contents
callist - List items from calibration data set
CALLIST is a MIRIAD task that lists some items in a calibration set.
Name of the calibration set. No default.
When set to 'true' is displays information per integration time.
Default: 'false', which only displays when source name changes.
When set to 'true' is displays information of all polynomials
When set to 'true' is displays information of all breakpoints
Slot code for band/phase/amp to print. Must be 3 or 4
characters. If empty, correllations are not printed.
First character is A(mp) or P(phase).
Second character is U(pper) or L(ower) sideband.
Third character is W(ide) band or any of 1..8 for passband.
Default: Empty, not used.
Baseline, combined with slot code specified before, to print.
Valid entries must be of the format A1-A2, where A1 and A2 are
the two antennas.
Default: not used.
Relative time with respect to the offset time0 in the gcal file
for which the complex gains/(phases and amplitude) are shown
for each baseline and sideband. Some test calculations
for anntenna based conversions are also shown.
Default: 0.0, meaning, not used.
If a second parameter is used, you need to specify if you want to
see Complex(Re/Im) ['c'] or else Amp/Phase pairs. Default: 'c'
Output device. (default is standard user output)
- PERSON RESPONSIBLE
This document was created by
using the manual pages.
Time: 18:35:38 GMT, July 05, 2011